Looking for a pretty and unusual holiday ornament or gift? Look no further than a DIY beeswax ornament. You can hang them on a tree or in a window for lovely effect. They smell really nice, too! These DIY beeswax ornaments also make wonderful gifts year round, especially for crafters, tailors, and seamstresses who can use the beeswax in a variety of ways. For example, I almost always wax my thread when I sew or embroider something — not only does this result in fewer knots and tangles, but it strengthens the thread as well.
DIY Beeswax Ornament Materials
Quick Links to Information in this Post
You can order beeswax online, or you can find blocks of regular beeswax at places like Michaels or Hobby Lobby. The white beeswax I found in the personal care section of Whole Foods (of all places). Flatter molds look a little nicer (as they show the light through the wax more) and use less wax in general.
Silicone molds are plentiful around the holidays. And you can find more specific molds on places like eBay (that’s where I found my winged heart mold many years ago) or Etsy. They are often sold to make soaps.
You’ll find more options among the candy molds. Like this 12 Days of Christmas mold with 12 individual ornament molds, complete with a ring for hanging — I’m trying this one next. If you use the plastic molds, get a can of mold release spray for easier extraction of your beeswax.
DIY Beeswax Ornament Step-by-Step Tutorial
Step 1: Put your wax in your double boiler to melt it.
Step 2: While your wax is melting, prepare your mold and ribbon. Put your mold in a pan in the event you have any wax run over. Then cut off a length of ribbon about 12″ long, knot the end, trim off the excess ribbon beneath the knot. Set the ribbon aside for now.
Step 3: Slowly pour your melted wax into the mold. Depending on your mold, you may need only to fill it up partway, or you may need to go all the way to the top for the full effect. If you need to fill it up all the way, avoid going over the edges.
Step 4: Place your prepared ribbon into the wax. Your goal is to get the knot covered by the wax, but not go all the way to the base of the mold to avoid having it show on the other side.
Step 5: If your ribbon doesn’t want to stay in place, set something near it that’s a little taller to keep it in place for you. (I used our giant 20-sided die.)
Step 6: Wait for it to cool and solidify before removing your beeswax ornament from the mold. Wax gets lighter and opaquer as it cools, so you can tell when it is solidified. You can tell when the wax is ready by how it pulls away from the mold. Gently pull the wax out of the mold, but do not pull on the ribbon yet (it needs more time to set in there).
Voila! A pretty DIY beeswax ornament for decorative or practical purposes.
DIY Beeswax Ornament Tips
There are many silicone molds you can use for your DIY beeswax ornaments — here is a pretty ornament one I found around the holidays:
Plastic candy molds are also okay, but it will be a little harder to get them out of the mold — definitely doable though. Here’s the liquified wax in my snowflake candy mold:
Remember you can use both regular (yellow) and white beeswax. Here’s how they compare:
Beeswax has a high melting point of 144°F to 147°F, so you can keep it with you without fear of it melting. If you live somewhere that gets hotter than 144°F, my condolences!
Did you know it takes 10 pounds of honey to make a pound of beeswax? Wow.
Uses for Beeswax
There are so many uses for beeswax beyond just a pretty, fragrant, decorative item. Here are the top uses for beeswax:
- Candles – You can make wonderful, clean-burning pure beeswax candles that clean your air!
- Soap – Beeswax can be used along with oils, honey, and lye to make a lovely smelling bar of soap. (See Beeswax Soap Recipe)
- Lip balm – Make your own DIY Burt’s Bees style lip balm with beeswax!
- Sewing – run your thread through the beeswax several times to strengthen it and minimize knotting.
- Basketweaving – used for pine-needle baskets
- Woodworking – a traditional finish for wood when mixed with mineral oil
- Archery – used to wax and protect the bowstring
- Sealing wax – mixed with shellac and oil, it because a flexible wax for sealing documents
- Bronze preservation – mixed with turpentine, it keeps bronze in good condition and untarnished
- Blacksmithing – used to finish ironwork, giving a nice sheen and preventing rust
That’s not all — you can also use it to make crayons, wood filler, jar seals, etc.
If you like my tutorials, please follow me on Pinterest and pin this tutorial for later: