How to Use Wood Filler to Patch Nail & Screw Holes

I love to make beautiful things by hand, but it’s so tough to get those smooth finishes you see on factory-made products. There’s nothing like a nail and screw hole to distract you from otherwise lovely project. But never fear—wood filler is here! I can teach you how to use wood filler to patch nail and screw holes for a crazy smooth finish.

We recently finished re-making our built-in shelves in my craft room, turning them from just boring shelves into shelves with built-in hutches and extra storage. During this project, Greg had to fill a LOT of nail and screw holes, and he taught me his trick to filling them in crazy smooth. You’ll want to do this with a product known a wood filler, which is sometimes called wood putty or wood plastic. It’s a little different than how you might have learned to do it — even different from how the manufacturers recommend you do it. But the finished result is amazing. Greg knows his stuff.

Craft room with built-in hutches with crazy smooth finish using wood filler to cover nail and screw holes

This wood filler technique is great for filling nail holes, screw holes, scratches, gouges, chips, and a variety of imperfections in wood. We recently used this trick to hide the screw holes when hanging up the large framed pegboard in my craft room. Can you tell where we screwed it in?

Large Framed Pegboard mounted up on the wall with screw holes patched with wood filler

So let me show you Greg’s awesome wood filler trick! This post contains some affiliate links for your convenience (which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more)! Read my full disclosure policy.

Read More :   Craftaholics Anonymous® | How to make Bean Bags + Halloween Games

Materials Needed to Use Wood Filler for a Smooth Finish

Quick Links to Information in this Post

Note: Wood filler/wood putty comes in two types: Acrylic-based and nitrocellulose-based. Acrylic-based wood filler is the more traditional type and the type we’re using for this technique. Nitrocellulose-based wood putty dries extremely fast, so it doesn’t work well for this super smooth finish technique—you also need to use acetone to clean nitrocellulose-based wood filler, rather than water, making it a little more finicky. 

The Trick to Smoothing Nail and Screw Holes with Wood Filler

First, clean the wood you want to fill with the wood filler. Bits of dirt, dust, paint chips, and wood particles will only stand in your way of getting a pretty, smooth finish. You may also want to sand any rough edges near the area you plan to fix (just be sure to clean up that wood dust when you’re done). A damp rag works best for cleaning, but you can also use a high quality paper towel (just make sure it doesn’t just shred and leaves bits behind).

Cleaned wood with nail and screw holes that need to be filled with wood filler

Next, scoop out a small amount of wood filler with your putty knife and apply it liberally across the wood with the imperfections. Don’t be afraid to really smear it on, pressing into the wood (and imperfections) as you go. You want MORE wood filler than you think you need because the filler will shrink as it dries. If you really have too much filler on your wood, scrape your putty knife over the surface to remove the extra. Just make sure there’s a good layer of wood filler over the nail holes, screw holes, or other imperfections.

Wood with wood filler spread out over it to fill nail and screw holes

Now let the wood filler sit for 5 minutes. It should not be dry completely before you move on to the next step.

How to Get the Wood Filler Crazy Smooth

Next, using your damp paper towel or cloth, rub the area with the wood filler. Use a buffing motion over the wood filler and it will smooth it out nicely. This technique will work quickly, so no need to overdo it. This is the magic trick for a smooth finish!!

A damp paper towel to use in rubbing and buffing the wood filler for a crazy smooth finish

Rubbing and buffing the wood with wood filler to create a crazy smooth finish

Wait for the wood filler to completely dry. When Greg made the built-in hutches, it took about an hour to completely dry.

Once the wood filler is dry, sand the area smooth with a fine sandpaper or sanding block until it is smooth.

Sanding the wood with dried wood filler to create crazy smooth finish

Finally, clean the area with another damp cloth to remove any residual sawdust. And don’t forget to clean your putty knife, too. You can clean the putty knife with water. Just be careful not to get any wood filler in your drain, or it will clog it when it dries.

Wood Filler Tips and Tricks

If you want to stain your wood, do it after the filler is dried, sanded, and cleaned.

Here’s a tip: Test your wood filler and stain first before you do a big huge project — this can save you some headaches if it doesn’t look the way you intended.

We didn’t stain our hutches—we simply painted them in our favorite white paint (Swiss Coffee). We did put a LOT of coats of paint on, though, to make sure they were well protected from all the crafting they’ll be getting over the years. See how smooth this looks? Not only can you not tell where the holes were, but the finished result is crazy smooth. Greg did great!

Super crazy smooth wood filled with wood filler to hide the nail and screw holes

I hope you enjoyed this tutorial! It may not a cute DIY project, but it’s a tip that will serve you well for all of your craft projects. Knowing how to properly finish your DIY projects is just as important as all the awesome things you make!

Note: If you’re trying to fill in nail or screw holes in drywall, use spackling compound or drywall mud rather than wood filler. The technique for filling holes in drywall is very similar to filling holes in wood. Here’s a great blog post about how to fix nail holes in wood.

If you use this trick to patch your nail holes, please share a photo of your project! You can send it to [email protected] or tag me on social media with #jennifermaker.

Love,
JenniferMaker.com

Want to remember this? Save this Hole Patching Trick to your favorite Pinterest board!

How to Use Wood Filler to Patch Nail and Screw Holes Crazy Smooth #woodworking #diy #homedecor

Learn how to use wood filler to patch nail and screw holes in wood. My technique will give you a smooth finish to fill imperfections like scratches, gouges, and chips.  #diy #tutorial #craftprojects #craftroom


Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button