My Cricut Maker Mat: Organizer + Dust Cover in One!

I got the new Cricut Maker machine! Woop woop! Naturally I had to make something for it. So I designed a special Cricut Maker Mat tool organizer that doubles as a dust cover. It is SO COOL. I used my new Cricut Maker cutting machine to cut out all the pieces for it, but you, of course, can cut it out by hand and use it as an organizer under another Cricut or a sewing machine, too. The free SVG, DXF, and PDF pattern files are provided for you to make this awesome accessory for your machine.

Check out this video of my Cricut Maker Mat in action here:

 

Skill Level: Beginner-intermediate — it’s really not very difficult.

Time: It took me about 1.5 hours to create this Maker Mat.

Finished Dimensions: 22″ wide by 17.5″ long

If you make the Maker Mat, snap a photo and hashtag it #jennifermaker — I’d love to see your creations on Instagram, Facebook, & Twitter! Or you can send me photos at [email protected] and I will include them here with your permission. I lovelovelove to see your photos!

This pretty Maker Mat was made by Ruth — isn’t it cute?

Cricut Maker Mat designed by Jennifer Maker and made by Ruth Burris

Here’s a gorgeous Maker Mat crafted by Wendy — love this fabric:

And check out this pretty in pink Maker Mat by reader Tracey Bradshaw:

Maker Mat made by reader Tracey Bradshaw

Maker Mat made by reader Tracey Bradshaw

 This post contains some affiliate links for your convenience (which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more)!  Read my full disclosure policy.

Maker Mat Tool Organizer & Dust Cover for the Cricut Maker

Maker Mat Materials

Quick Links to Information in this Post

Cricut Maker Mat Step-By-Step Tutorial

Download Design #50 which is my cut file/pattern for my Cricut Maker Mat, which is available as a SVG, DXF, and a PDF in my free resource library (get the password by filling out the form at the very bottom of this post). If you’re using Cricut Design Space, upload the SVG and place it on your canvas.

Tip: If you’re not sure how to upload an SVG cut file to Cricut Design Space, watch this helpful video training series I made. If you’re on an iPhone or iPad, here’s how to download and upload SVG files to the Cricut Design Space app.

UPDATES/CHANGES: Check for any updates, changes, or additional videos for this project at https://jennifermaker.com/updates

Ungroup everything, then change the two sets of lines (indicated by the red diagonal line icon) to Write (choose washable fabric marking pen). You also need to attach these two fabric marking pen lines to their respective fabric pieces so they stay together. Refer to the graphic below or the assembly video to see which layers get set to Write, and which layers get set to Attach. 

Uploading the Cricut Maker Mat SVG to Cricut Design Space

Iron your cotton fabric so it has no wrinkles. (Don’t iron your fusible interfacing!)

Iron your fabric before cutting on the Cricut Maker

Watch my assembly video, which goes through the entire cutting and assembly process.

Cut out your materials (cotton fabric, interfacing, and the optional vinyl for the heart) using my pattern. Tip: If you’re cutting the pattern out on your Cricut Maker, put a full 12″ x 24″ piece of fabric on your FabricGrip cutting mat before you cut it to ensure you have a large enough piece. You can, of course, just cut the large pattern pieces by hand. You’ll get more precision if you use the Maker, however.

Tip #1: Don’t forget to put your Washable Fabric Marking Pen in the tool holder if you plan to mark your fabric!

Tip #2: Place your mint cotton material on the FabricGrip mat face down so that the fabric marking pen appears on the back, where you want to see it. The other layers of mint fabric and the white fabric can go on the mat face up.

Cricut Maker cutting fabric

Once all of your materials are cut, identify each piece using this diagram as I will refer to them by name from this point forward.

Fabric pieces for the Cricut Maker Mat

Lay one (1) of piece A (back panel), one (1) of piece B (front panel), and piece E (top panel) on your work surface, face down. Now lay one (1) of piece F, one (1) of piece H, and both pieces G on top of pieces A, B, and E. Note that both of pieces G (interfacing strips) go on piece E (top panel). Interfacing should be centered inside the edges of the fabric pieces. And in the case of pieces G, they should NOT overlap; they should just touch of even have a small gap in between.

Important note: Interfacing must go shiny side against the fabric — the shiny side is the fusible side.

Match up the fabric panels and interfacing.

Now, follow the directions on your fusible interfacing package to fuse them to the back side your front, top, and back panels. The directions for Craft-Fuse say to place shiny adhesive side of interfacing against wrong side of fabric, then cover with a damp press cloth. Using a hot, dry iron, apply slight pressure with a gliding action to fuse, allowing iron to stay on fabric for 8-10 seconds.

Fuse your interfacing to the back of your fabric layers

Once you have your interfacing fused on, you can sew these three layers together in this order: front fused layer (A/F) + top fused layer (E/G) + back fused layer (B/H). Place right sides together and sew 1/2″ from the edge (the 1/2″ seam allowance is built into the pattern).

Sew the panels together for your Cricut Maker Mat

This is what it looks like when those pieces are sewn together.

Layers sewn together for Cricut Maker

Now press the seams open for clean, crisp seams. (If you’re not familiar with what that means, a pressed seam is a seam that is opened on the back and pressed to lie flat.)

Press seams flat for your Cricut Maker

Now sew together the remaining Piece A (back panel), remaining Piece B (front panel), and remaining Piece E (top panel). Place right sides together and sew 1/2″ from the edge (the 1/2″ seam allowance is built into the pattern). These three pieces are the lining of your Maker Mat and will not be seen unless you turn it over.

Sew the lining layers together for your Cricut Maker Mat

If you want to iron-on the gold heart onto the front pocket (piece C), this is a good time to do it. Just be mindful to leave enough space at the bottom of the pocket for the bias tape (about 1/2″).

This is also the time to sew the bias tape onto the TOP edge of your two pocket pieces (C and D). The tape should extend all the way to the edge of each piece.

It’s now time to sew the pockets! Place piece C on top of piece D, both right side up. Line up the marking lines with one another. Pin in place.

Front and middle pockets of the Cricut Maker Mat

Sew along in the spots marked with a yellow dotted line in the graphic below. Sew from the bottom all the way to the top of the bias tape on the front pocket, but do not sew beyond that first row of bias tape.

Sew along lines on pockets for Maker Mat

Tip: You can totally change the configuration of the pockets on your Cricut Maker Mat if you wish — feel free to customize this to your needs.

Once Pieces C and D (front and middle pockets) are sewn, place the pocket assembly on the fused layer assembly (the pockets go on the smaller white section, flush with the outer edge). Pin in place.

This time, sew along the spots marked with the orange dotted line in the graphic below.

Sew along dotted lines on pockets for Maker Mat

This is what it looks like when the pocket assembly is sewn to the fused layer:

Place the pocket assembly on the front fused layer

Place the fused layer on top of the lining layer, wrong sides together. Make sure all seams match up.

Put the two layers together for the Cricut Maker Mat

Pin in place.

Pin your layers together for your Cricut Maker Mat

Cut out four ties from your bias tape, about 12″ long each. What I did was make sure I had enough bias tape to go around the four sides of my Cricut Maker Mat, then I cut the remaining tape into four strips.

Cut out four ties for your Maker Mat

Begin pinning the bias tape onto the edge of your Maker Mat, beginning at the bottom back corner (as shown in the photo below). Make sure you’re getting the bias tape around all layers at the edge and as far over onto your fabric as possible. Pin the first 12″ inches into place.

Pin the bias tape to the Maker Mat

Place a tie on the BACK of the front panel your Cricut Maker Mat, in line with the top of your front pocket, and tuck the edge under the bias tape. Repeat for the other side.

Put the ties in the right spot on the Maker Mat Make sure the ties are under the bias tape

Pin the other two ties onto the back of the back panel of your Cricut Maker Mat, about 2.5″ from the top panel, and again tuck the edge under the bias tape.

Put the ties in the right spot on the Maker Mat

Sew down the edge of the bias tape, about 1/8″ from the edge. Make sure you’re getting all layers, including any ties and the other side of the bias tape, when you sew.

Sew the bias tape onto the edges of your Maker Mat

When you get to a corner, you’ll want to fold the bias tape into a right angle to form the corner.

Sew the corner of the Cricut Maker Mat

Continue sewing all four sides of the Maker Mat. When you get to the end, cut off the bias tape with an extra 1/2″ to spare.

Cut the end of the bias tape with an extra 1/2" to spare

Now, fold the end up and under to be flush with the edge of your Cricut Maker Mat and finish sewing.

Sew the corner of the Cricut Maker Mat

Turn the corner of the bias tape

And that’s it! Trim off any hanging threads and put it on your Cricut!

Tip: To remove the washable fabric marking pen lines, just spray with water, rub a little with your finger, and allow to dry.

Maker Mat Tool Organizer & Dust Cover for the Cricut Maker

Maker Mat Tool Organizer & Dust Cover for the Cricut Maker

Maker Mat Tool Organizer & Dust Cover for the Cricut Maker

Get the free cut files/pattern for my Cricut Maker Mat

You’ll find the cut files (for the Maker) and PDF pattern (for cutting out by hand) in my free resource library — get the password to the library by filling out this form:

Get access to ALL of my free cut files!

Subscribe (free!) to my newsletter with updates and tips PLUS get instant access to my resource library with this file and all of my other free files, printables, and patterns! Once subscribed, I will send you a newsletter with details about my new free files each week.

Free Resource Library
Enter my free resource library for my latest files, printables, and patterns! Password is ‘craftthelove’ — please copy and paste that in at the link above. Thanks for being a subscriber!!

I’d love to see your project! If you make one, please share a photo in our Facebook group or tag me on social media with #jennifermaker.

Here is a Maker Mat made by reader Sharon Moore — isn’t it cute?

Maker Mat made by reader Susan Moore

Please let me know if you have any questions!

Love,

JenniferMaker.com

Like this tutorial? Please pin it to your favorite Pinterest craft board!

Cricut Maker Mat Tutorial | Dust Cover | Tool Organizer | Free Cut File and Pattern

This DIY Cricut Maker mat and dust cover is both functional and pretty. #cricut #cricutmade #cricutproject #diy #tutorial #craftroom


Read More :   Camilla Parker Bowles' Best Fashion Moments

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button